| Rotation Speed | 10-80 rpm |
| Tilt Angle | 0°～ 90° |
| Dimensions(W×D×H) | 250×320×300 (mm) |
| Weight | 4.5kg |
1. Before the machine is operated, please check whether there is any foreign matter in the homogenization box to prevent malfunctions and damage to the homogenization bag during operation. 2. The power plug must be firmly inserted in place. If it is loose, it can affect the computer controller and cause a crash. If it shows a crash, please turn off the power switch on the rear side and restart it after shutting down for 3 minutes. 3. Please do not open the homogenizer door at will when hammering the plate to prevent the sample liquid from overflowing. The "Open/Stop" key should be pressed, and the equipment actively suspends the operation. After closing the door, press the "Open/Stop" button again, and the equipment will automatically complete the remaining operations. 4. The bottom of the homogenizer door is designed to prevent accidental bursting of the homogenizer bag and facilitate cleaning of spills. The bottom is designed to be empty and a drip tray can be placed. Therefore, please do not reach from the bottom with your hands during the operation of the instrument to prevent your fingers from being twisted. 5. The storage of blood mixer and homogenization bag should be protected from direct sunlight, especially the homogenization bag should be stored in a place without sunlight or ultraviolet rays to prevent aging. 6. Hard, bone-like, and ice-like substances should not be used to prevent damage to the homogeneous bag. 7. If the instrument is not used for a long time, the power supply should be cut off and the plug should be unplugged. 8. When the amount is small, when the speed needs to be increased, and when the homogenous fiber is tough, the rear knob can be used to adjust the distance between the clapboard and the visible window to achieve a very good homogenization effect.